answersLogoWhite

0

Search results

Hi,

Single mode fiber is used to send the data from transmitter to receiver or repeater. In single mode we can only send single signal at a time and hence it is single mode.

The Single mode fiber will have core and cladding arranged in such a way that the core has got one refractive index and the cladding has got another refractive index which will be constant through out the fiber.

1 answer



Stone cladding is a thin stone layer which can be applied to a building or house. Using stone cladding one can create a timeless and elegant look of the house. It is also possible to use stone cladding to craft bowls and art.

1 answer


depends on the style of cladding, examples of Waney Edge and Shiplap will require nails

1 answer


Still have questions?
magnify glass
imp

cladding fuel is something that fuels the air plane s and thing that fly in the sky without cladding fuel people in the planes wouldn't be able to flt their planes

1 answer


Timber cladding is a special material that is used for home designers and engineers are more a stylish option than standard wood. Timber cladding is more flexible and is just as strong as wood.

1 answer


in an optical fiber total internal reflection takes place between core and cladding. when core has greater refractive index than cladding.

if n1=n2 then their is no TIR.

1 answer


do you mean a cladding noise?if it is comming from under the vehicle have your catalyc converter checked

1 answer


cladding is a system that is reducing the temperature of a certain place that is using for absorving from ceiling or wall in certain house or building!

1 answer


A layer of a glass surrounding the center fiber of a glass inside a fiber-optic cable is called cladding.

1 answer


Euroclad's standing seam cladding systems offer a great amount of advantages for installation in modern construction projects. 

1 answer


Asbestos Super Six cladding typically weighs around 8-10 kg per square meter. However, the weight may vary depending on the specific brand and thickness of the cladding.

1 answer


Some types of Cedar Cladding available for summer houses include bevel, tongue and groove, rough cut and board and batten. You can get more information about Cedar Cladding at the WiseGeek website. Once on the page, type "Cedar cladding" into the search field at the top of the page and press enter to bring up the information.

1 answer


on astro vans that have that wrap around at the bottom (e.g.)a green van with gold trim....the trim is the cladding.

1 answer


With galvanized nails.

1 answer



because in the fiber optics the transmission of the light waves are through core and cladding is to cover the core

1 answer


There are two basic types of optical fiber.

Multi Mode Optical Fiber

Used to transmit many signals per fiber. (Multi Mode fibers are generally used for computer networks, lan applications).

MultiMode Optical Fiber is produced as 50/125 and 62.5/125. (Core/Cladding diameter in microns.)

Single Mode Optical Fiber

Used to transmit one signal per fiber (Single Mode fibers are generally used for telephone and cable tv applications.)

Single Mode Optical Fiber is produced as 8/125 and 9/125. (Core/Cladding diameter in microns.)

4 answers


Unfortunately, there is no easy way to remove it. All of the cladding parts are held on with plastic clips that must be broken to remove the cladding. They are designed this way for some reason. Also, each piece should have some screws that hold them on. So, remove the screws and just rip the cladding off. I just had to replace two pieces and it sucks. The clips are $3 each at the dealership and I had to buy 20 of them.

1 answer



installing the final skin....ie. siding

1 answer


caldding is the plastic on the bottom side of the truck

1 answer





You must must find out the best ways to planning permission. Cladding comes in a variety of attractive colors and forms. You can find out about timber durability requirements.

1 answer


Fiber optics are cables that are used to transmit data at the speed of light. This uis especially popular with Verizon FiOS services.

for details on fios go to www.whyisfiosbetter.viviti.com

3 answers


Internal cladding and finishes refer to the materials used to cover and decorate the interior walls of a building. These can include options such as drywall, plaster, wood paneling, tiles, wallpaper, paint, or decorative finishes like stucco or stone veneer. The choice of cladding and finishes can impact the aesthetics, acoustics, durability, and overall feel of a space.

1 answer


Asbestos cladding is a general construction sheeting formed from the mixture of a natural cement and asbestos. It makes a good weather proofing material at low cost. The asbestos content could be as high as 30% Chrysotile (White asbestos). Some cladding sheets have been found with smaller levels of Blue and Brown asbestos or a mixture of all three.

1 answer


Steel in the underframe and aluminium sheet in the exterior cladding.

1 answer



By using a stainless steel angle support or channel support rail set in concrete Brick work would be placed on these types of support

1 answer


Stage One: Remove existing gladding utilizing a crowbar and guarantee that the zone is away from trash and that the lumber stud casing or workmanship/block substrates are prepared for the cladding.

Stage Two: Place fixing manages on the region you wish to clad – utilizing cladding pins to make sure about – with a breathable dampness boundary behind them. These boards ought to be close to 600mm separated for while cladding and 400mm for woodgrain or hued cladding. It is significant that you utilize the right trim for the proposed application, for example U-channel cladding trim or outer corner trim.

Stage Three: Using indicated cladding pins, join a starter trim to the lower part of the territory that you're looking to clad.

Stage Four: Once the trim has been finished, draw in the back lip of the cladding board into the starter and vertical fixing manages and secure it into place with the pins. It is a smart thought to begin in the middle and work outwards, cutting boards (if vital) with a fine-toothed saw.

Stage Five: Continue stage four utilizing the tongue and section joints – if utilizing cladding without this element, utilize joint trims to interface – to append the new lengths of cladding to the ones previously introduced. It is significant that you leave 5mm holes at each conclusion to take into account development.

Stage Six: When fitting the top cladding board, use pressing behind the board to guarantee that the substance of the cladding is adjusted. After fitting the last board, utilize the widespread U trim along the board to give it the most tastefully satisfying completion.

for more detail. visit for website our site sudhakarind

4 answers


Most likely it has been exposed to heat or a chemical that discolored the cupro-nickel cladding. If it's taken on a gold tone that would make the copper edge seem to blend in with the outer cladding. Unfortunately as such it's a damaged coin and has no extra value.

1 answer


The critical angle for the boundary between two materials (such as the core and cladding of an optical fibre) is: θc = arcsign(n2/n1) Where n2 is the refractive index of the cladding layer. and n1 is the refractive index of the core layer. If we use a simply unclad fibre where the core has n1=1.50 and the air surrounding it forms a layer of n2=1.00 θc = 41.8 degrees.

1 answer


Wall cladding is a type of decorative covering used on building exteriors. Though usually non-structural in nature, it may be functional in addition to decorative. This can include a degree of water-proofing, a barrier against the wind, or other protections. Cladding can take a number of different forms, be made from many different materials, and is often used to create a decorative building facade. Some of the popular materials for cladding include various metals, stone, and composite sidings.

2 answers


Wooden Cladding

A multifaceted procedure called wood cladding entails coating the outsides of any building or structure with a layer of high-quality materials that offer thermal insulation and defence against the elements. The outer surface frequently affects how objects strike or land on a surface.

Types of Wooden Cladding

Ipe Cladding

Ipe, often known as Brazilian walnut, is a stunning exotic wood from South America. Its name is pronounced, "Ee-Pay." Structures made of ipe wood are robust, durable, and naturally impervious to decay, abrasion, weather, and insects. It is up to five times tougher and almost twice as dense as other types of wood.

Thermoash Cladding

The term "Thermoash Wood'' refers to the heat treatment procedure that timber undergoes to increase its tensile strength and stability, making it the perfect timber for outdoor use. The thermoash wood is chemical and resin-free and entirely natural, and the manufacturing procedure for thermowood employs no chemicals.

WPC Cladding

Wood-Plastic Composites (WPCs) are composite materials of thermoplastics like PE, PP, PVC, or PLA with wood fibre/wood flour. WPC is now referred to as a sort of flooring with an extruded hard core and top vinyl veneer, according to those in the flooring industry.

2 answers


Keeps corrosive liquids from eating through the walls of the tank

1 answer


Stone cladding can help lower indoor temperatures by providing thermal mass, which can absorb heat during the day and release it slowly at night. This can help in cooling a building by reducing the need for mechanical cooling systems in hot climates. However, the effectiveness of stone cladding as a cooling strategy will depend on factors such as the type of stone, building orientation, and insulation levels.

2 answers


If the cladding has come off and the coin is thinner than a normal quarter, it's called a lamination error. That happens when the bond between the copper core and the cupronickel cladding fails. This error can retail for $10-12.

However if the coin is the same thickness as a regular quarter it's NOT a lamination error because it still has full cladding. The color change is the result of being plated with some other metal for use in jewelry, or exposure to heat/chemicals. In this case it's considered to be an altered coin and has no extra value.

1 answer



Yes it is extremely useful, Can be used as cladding for nuclear reactors

1 answer


Nickel-colored, which is a dull silvery color.

The cladding is made of nickel and copper.

1 answer


IT GIVES A SMOOTH AND RICH OUTER FASCIA,PROVIDE MADE WATERPROOF.

s.mahaalingam

1 answer


Cladding is a covering or coating that is applied to a building's exterior surface to provide protection against weather elements, enhance aesthetics, and improve insulation. It serves as a barrier against moisture, wind, and other external factors to maintain the integrity of the building structure. Common materials used for cladding include wood, metal, vinyl, and brick.

3 answers


Home Again with Bob Vila - 1990 Cape Cod Affordable Cladding Insulating and Zoning was released on:

USA: 15 January 2005

1 answer


I don't know for sure, but I've read that the surface underneath is not painted the same color. The cladding is held on by tabs.

1 answer


It matches their cheap and tacky plastic fans

1 answer


D. B. Spacey has written:

'Industrial roofing and cladding'

1 answer


Man made woods can be use for flat-pack furniture, work surfaces, wardobes, wardobe doors, flooring, cladding and sheds.

Man made woods can be use for flat-pack furniture, work surfaces, wardobes, wardobe doors, flooring, cladding and sheds.

Man made woods can be use for flat-pack furniture, work surfaces, wardobes, wardobe doors, flooring, cladding and sheds.

Man made woods can be use for flat-pack furniture, work surfaces, wardobes, wardobe doors, flooring, cladding and sheds.

Man made woods can be use for flat-pack furniture, work surfaces, wardobes, wardobe doors, flooring, cladding and sheds.

^ note to answerer, if your going to repeat yourself lots of times, at least spell 'wardrobe' correctly. Thanks!

1 answer